비트메인 앤트마이너
아이스리버
왓츠마이너
가나안 아발론
금껍질
솔로 마이너
엘파펙스
볼크마이너
재스민
솔방울
비트코인
도지코인
알 레오
카스파
알파
Nexa
ETC
CKB
대시
카데나
20-Slot 200kW Hydro Cooling System for Antminer 2U
컨테이너 용량
20 단위
최대 부하 시 보관
200 KW
연속 전기 부하
관습
Standard
수력 발전소
열 관리
전원 입력
380V~415V 교류 50/60Hz
가용성
재고 있음, 즉시 배송 가능 • DDP 해상 운송 가능
제품 설명
The 20-Slot 200kW Hydro Cooling System is a specialized liquid cooling solution engineered specifically for Antminer 2U models. As dedicated 2U hydro infrastructure remains rare across the market, this standardized 42U rack delivers a purpose-built solution—housing up to 20 units of Antminer S23e U2H, L9 Hyd 2U, and L11 Hyd 2U with an ultra-low PUE below 1.05.
Pairing an indoor hydro cabinet with a high-efficiency outdoor dry cooler, the system guarantees stable thermal performance across demanding climates. The integrated CDU automatically balances fluid circulation, keeping chip temperatures optimal to eliminate heat-induced throttling and ensure full-hashrate stability.
Factory pre-wired and pre-plumbed for true plug-and-play commissioning, the system minimizes on-site deployment time. It also supports flexible custom configurations and modular multi-rack expansion, allowing operators to seamlessly scale their 2U hydro capacity as their mining operations grow.
핵심 장점
모듈형 1대N 인프라 확장성
1~N 모듈식 설계로 200kW에서 최대 1,000kW까지 유연한 전력 확장이 가능하여 채굴 현장의 수요 변화에 따라 규모를 확장할 수 있습니다. 맞춤형 고유량 펌프 시스템과 전용 전력 제어 캐비닛을 갖춘 이 솔루션은 여러 랙에 걸쳐 안정적인 관리를 보장하므로 해시레이트 증가에 따른 대규모 인프라 개편이 필요하지 않습니다.
전체 사양
외부 치수
길이:950mm, 너비:600mm, 높이:2150mm
내부 치수
길이:950mm, 너비:600mm, 높이:2150mm
중량(평량)
250KG
|
모델 |
AP-A2U20 |
설치된 용량 |
20 석 |
|
인증 |
UL/CE 인증 |
시스템 구성 |
Dry cooler *1 |
|
시스템 에너지 소비량 |
10kW |
방열 용량 |
> 200KW |
|
환경 적응성 |
-20 ℃ ~ 45 ℃ |
캐비닛 사양 |
42U 표준 캐비닛 |
|
항온 모드 |
Variable frequency speed control of EC fan+EC fan stepwise regulation |
펌프 |
3kW * 1 |
|
내각 무게 |
250kg |
캐비닛 치수 |
950mm (L) * 600mm (W) * 2150mm (H) |
|
CDU weight |
250kg |
CDU 치수 |
1050mm (L) * 600mm (W) * 2150mm (H) |
|
Dry cooler weight |
650kg |
Dry cooler Dimensions |
2400mm (L) * 1450mm (W) * 1730mm (H) |
20슬롯 앤트마이너 2U 수냉식 랙 제품 브로셔
제품 사양, 설치 가이드 및 작동 지침이 포함되어 있습니다.
인증 기준
당사 제품은 안전성, 신뢰성 및 성능에 대한 주요 국제 표준을 충족합니다.
중국 선급 협회
해양 및 해상 규정 준수
UL은 상장
안전성 테스트 및 인증 완료
CSA 인증
북미 규정 준수
CE 마킹
유럽 적합성
완벽한 냉각 솔루션
당사는 수냉식 캐비닛 및 컨테이너부터 CDU 및 건식 냉각기에 이르기까지 모든 규모에 맞는 완벽한 수냉식 솔루션을 설계 및 제조합니다.
|
❄️ 냉각 용량 |
|
⚙️ 마이너 슬롯 |
|
📏 크기 (가로 × 세로 × 높이) |
|
🏢 지원 |
비교 자료
20슬롯 앤트마이너 2U 수랭식 랙
|
200kW |
|
20 슬롯 |
|
950 600 × × 2150 MM |
|
모듈형 시설 확장 |
ANTRACK AR31 20-Slot Antminer 2U Hydro Cooling Rack
|
200kW |
|
20 슬롯 |
|
1,000 12,00 × × 2,300 MM |
|
홈 설정 및 열 재활용 |
ANTRACK AR30 20-Slot Antminer 2U Hydro Cooling Rack
|
200kW |
|
20 슬롯 |
|
1,000 12,00 × × 2,300 MM |
|
전문 홈 시설 |
15슬롯 앤트마이너 3U 수랭식 랙
|
200kW |
|
15 슬롯 |
|
8,00 1,050 × × 2,100 MM |
|
모듈형 시설 확장 |
20슬롯 앤트마이너 2U 수랭식 랙 FAQ
The system is purpose-built and factory-matched for the Antminer 2U hydro series, providing 20 standardized slots engineered specifically for models including the Antminer S23e Hyd 2U, L9 Hyd 2U, and L11 Hyd 2U. The 42U cabinet's internal mounting rails, quick-connect water manifolds, and dedicated 20A circuit breakers are precision-configured to match the exact chassis dimensions, power inputs, and thermal dissipation requirements of these 2U units out of the box.
Under standard ambient temperatures, the system operates as a closed-loop dry cooler with zero water consumption, circulating coolant without evaporative loss. The integrated adiabatic wet curtains serve as an optional high-temperature booster. During peak summer heat waves (when ambient air exceeds 35°C–40°C), wetting the curtains pre-cools the incoming air through evaporation, maintaining high heat transfer efficiency and preventing miner thermal throttling with minimal water usage.
The system requires a 380V–415V AC 3-phase power supply (50/60Hz). Total power consumption is approximately 210kW (covering 20 high-power 2U miners plus the cooling pumps and dry cooler fans). The indoor rack comes pre-wired with an integrated industrial PDU featuring twenty 20A circuit breakers (20A × 20) for individual slot protection. Operators typically require a dedicated 250 kVA to 315 kVA transformer (or equivalent facility headroom) to support continuous full-load operation.
The indoor rack connects to the outdoor dry cooler via two insulated fluid pipes (supply and return) powered by the CDU’s integrated 17.3 m³/h circulation pump. The standard recommended piping distance between the indoor cabinet and outdoor cooler is within 10 to 15 meters (30–50 ft) using DN50/DN65 pipes to ensure minimal pressure drop and optimal flow rates. If your site requires longer pipe runs, our engineering team can provide auxiliary booster pump guidance.
Yes, the system is fully modular and scalable. Operators can deploy individual stand-alone units (1 rack + 1 dry cooler) or parallel multiple 42U racks together in warehouse environments. For multi-rack deployments, multiple indoor cabinets can either retain dedicated dry coolers for independent redundancy or tie into a centralized high-capacity outdoor cooling loop, allowing your 2U hydro fleet to expand smoothly from 20 units to hundreds of units.
The all-in-one CDU is equipped with an automated PLC control module that monitors key hydraulic parameters in real time. It features a low-liquid-level alarm to detect coolant loss, an automated blowdown/drainage alarm for maintenance, and loop pressure/temperature tracking. If an abnormal pressure drop or critical fluid temperature is detected, the system triggers alerts to protect ASIC hashboards and electrical components from thermal and dry-run damage.
